Motec Pty USB Devices Driver Download For Windows 10
Does the Navigator and it's supporting Windows software work on Windows 10 on a PC or Laptop? The short answer is that the underlying structure of Windows 10 is still quite similar to earlier versions, and the connection to the PC, and functions of the software are still very much the same as they were previously. So, yes, you can run the supporting software for your Navigator on a Windows 10 machine. The supporting software includes the following:
Allows Sync mode connection to your PC
Allows you to perform updates to the street mapping on your Navigator
Allows you to send/receive 4WD data (waypoints, tracks, routes) between your PC and your Navigator. You can also view the same set of maps which are installed on your Navigator on your PC. Here are a few tips to keep in mind: To install the Hema Navigator Explorer PC software from the SD card in your Navigator, it must be connected in Mass Storage mode, as per: USB Mass Storage Mode connection to PC Remember, to use the Hema Navigator Explorer application on your PC, your Navigator needs the USB port to be in Windows Sync mode! See this article in our Knowledgebase for more info: To connect the Navigator to the PC in Windows Sync mode, the PC must have Windows Mobile Device Center (WMDC) installed on it. WMDC is NOT pre-installed on Windows 10, but is IS downloaded automatically by Windows Update on your PC, IF automatic Windows updates are enabled. You MUST make sure that you have enabled Windows Update in the settings on your Windows 10 PC for it to automatically install WMDC. When you connect a Windows Mobile device, the Windows update service will automatically download and install WMDC and associated drivers. This process can take some time, so be patient! The above information applies also to Windows 8 (and 8.1). Please rate articles! It helps us to ensure that you can find relevant information in the Knowledgebase. You can use the Please rate this article option from the Tools menu at upper-right. Comments left when rating articles are not replied to, although they are viewed and taken into account. If you have an issue you need help with, please submit a ticket at Hema Tech Support Content found in the Knowledgebase is accurate as at time of publication. |
- Motec Pty USB Devices Driver Download For Windows 10
- Motec Pty Usb Devices Driver Download For Windows 10 64-bit
Motec Pty USB Devices Driver Download For Windows 10
If you are using any 64 bit version of Windows 7 or 8, you must download ADL2 and UTC 64 bit USB drivers from software/latestreleases for the communications to work between your laptop and the device. Some MoTeC software may work on Apple Mac machines with the use of a Windows XP emulator which is available from the Apple website. . No need to install drivers or any software for Windows 8 or Mac OS X 10.5 or higher. Supports transfer speeds up to 100Mbps. Compliant with USB specification version 2.0. Compliant with IEEE 802.3/802.3u. Supports Windows 8 / 7 / Vista / XP (32/64-bit). Supports Mac OS X 10.5 or higher. Shipping Weight:.2 kg.
Motec Pty Usb Devices Driver Download For Windows 10 64-bit
Motic Images Plus 2.0ML for Microsoft Windows Legacy Version w/o MI Devices (2015-01-26) Motic Educator Service Pack with DS300 Calibration (2015-01-26) Motic Play 1.2 ML Service Pack with DS300 Calibration (2016-02-01) Motic Images Plus 3.0 for Windows 32 bit OS (2016-11-24) Motic Images Plus 3.0 for Windows 64 bit OS (2016-11-24).