Logiccontrols Port Devices Driver Download

 admin
Synaptics_v19_2_17_59-Win10-x64.cab

In the Device Manager right pane, locate and expand Portable Devices or Other Devices, depending on which one you see. Right-click the name of the device you connected, and then select Update Driver Software. In the Hardware Update wizard, select Browse my computer for driver software and click Next. A library of over 250,000 device drivers, firmware, BIOS and utilities for Windows. Provides support for NI data acquisition and signal conditioning devices. NI-VISA Provides support for Ethernet, GPIB, serial, USB, and other types of instruments. When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device. Common USB Device errors are ‘ usb port not working ‘, ‘device descriptor request failed error’ or ‘bugcodeusbdriver’ issues.

149 MB
Logiccontrols
354,340
Graphics Cards
Windows 10

Scrybe Gesture Workflows can greatly enhance your productivity by expanding your Synaptics TouchPad’s capabilities. By combining Synaptics Gesture Suite’s scrolling, zooming and rotation gestures with Scrybe’s symbols, one can unleash the power of the TouchPad.
Important:
The Synaptics device driver is customized to meet the specific requirements of your device manufacturer. To ensure that you get the appropriate device driver for your system, download your Synaptics device driver from your system manufacturer's support website.
For more information on the advanced features enabled by the Synaptics Driver, view our Driver Product Brief.
Note: Installing a generic driver may result in the loss of OEM-customized Synaptics pointing device functionality. Setting a restore point before installing is a quick way to rollback to the previous driver.

Here's other similar drivers that are different versions or releases for different operating systems:
    • March 1, 2011
    • Windows XP/Vista/7
    • 50.9 MB
    • August 15, 2016
    • Windows 2000/XP
    • 6.2 MB
    • November 11, 2014
    • Windows (all)
    • 120 MB
    • March 1, 2011
    • Windows Vista / 7 64-bit
    • 24.3 MB
    • November 8, 2011
    • Windows Vista / 7 64-bit
    • 53.9 MB
    • July 12, 2010
    • Windows 7
    • 37.0 MB
    • May 31, 2010
    • Windows XP/Vista/7
    • 14.2 MB
    • May 31, 2010
    • Windows XP/Vista/7
    • 13.6 MB
    • January 6, 2009
    • Windows 95
    • 5.9 MB
    • January 6, 2009
    • Windows NT
    • 5.8 MB

▸ Browse all Synaptics drivers

The Logic Controls LD9900 USB device drivers are needed for complete installation of the LD9900 pole display.

There are two types of drivers available. The first uses a specific device name (.LCLD9) to access the pole display directly. If you are using OPOS or if the POS software was tailored to use this device name, refer to the first section below. If the POS software is only able to access COM ports for the pole display, follow the virtual COM port device driver instructions.

Installing the USB drivers with device name .LCLD9.

Floppy Disk Install

To install the pole display USB drivers from the pole display floppy diskette, perform the following steps:

  1. Connect the USB pole display cable to the USB port.
    The operating system detects the device and the Found New Hardware wizard appears.
  2. Click to select Specific Location, and then click Next.
  3. Insert the LD9900 USB Driver diskette into the floppy disk drive.
  4. Under the Include this location in the search field section, click Browse and click to select A:Win2000.
  5. Click to select driver LCLD9.inf, click Next, and thenclick Finish.
  6. Remove the LD9900 USB Driver diskette.
  7. Right-click My Computer andclick Properties.
    The System Properties window appears.
  8. Select the Hardware tab and click Device Manager.
    The Device Manager window appears.
  9. Complete the installation by verifying the driver is now appearing in Device Manager correctly. (Figure 1)
    Figure 1 - Correct Device Manager Listing

Floppy Disk Reinstall

To reinstall the pole display USB drivers from the pole display floppy diskette, perform the following steps:

  1. Remove the USB pole display cable from the USB port.
  2. Right-click any unknown items, and then click to select Remove. (Figure 2)
    Figure 2 - Unknown Device
    NOTE: If there are any references to Line Display LD9900, right-click on the listing, and then click Uninstall.
  3. Repeat step 2 until there are no unknown devices in Device Manager.
  4. Reconnect the USB pole display cable to the USB port.
    The operating system detects the device and the Found New Hardware wizard appears.
  5. Click to select Specific Location and click Next.
  6. Insert the LD9900 USB Driver diskette into the floppy disk drive.
  7. Under the Include this location in the search field section, click Browse and click to select A:Win2000.
  8. Click to select driver LCLD9.inf, click Next, and thenclick Finish.
  9. Remove the LD9900 USB Driver diskette.
  10. Click My Computer,andthen click Properties.
    The System Properties window appears.
  11. Select the Hardware tab and click Device Manager.
    The Device Manager window appears.
  12. Complete the installation by verifying the driver is now appearing in Device Manager correctly. (Figure 1)

Internet Install

To install the pole display USB drivers from the Internet, perform the following steps:

Logic Controls Port Devices Driver Downloads

Logiccontrols port devices driver download pcLogiccontrols Port Devices Driver Download
  1. Download the driver file at:www.logiccontrols.com/web/utilities/ld9w2k.zip.
  2. Choose Open from the File Download prompt.
  3. Click File and then click to select Extract All.
    The Extraction Wizard screen loads.
  4. Type C:LCLD9 at the prompt and click Next.
    The Extraction Wizard begins unzipping files.
  5. Click Finish to complete the file extraction.
  6. Connect the USB pole display cable to the USB port.
    The operating system detects the device and the Found New Hardware wizard appears.
  7. Click to select Specific Location and click Next.
  8. Under the Include this location in the search field section, click Browse and click to select C:LCLD9.
  9. Select driver LCLD9.inf, click Next, and then click Finish.
  10. Right-click My Computer andthenclick Properties.
    The System Properties window appears.
  11. Select the Hardware tab and click Device Manager.
    The Device Manager window appears.
  12. Complete the installation by verifying the driver is now appearing in Device Manager correctly. (Figure 1)

Internet Reinstall

To reinstall the pole display USB drivers from the Internet, perform the following steps:

  1. Download the driver file at: www.logiccontrols.com/web/utilities/ld9w2k.zip.
  2. Choose Open from the File Download prompt.
  3. Click File and then click to select Extract All.
    The Extraction Wizard screen loads.
  4. Type C:LCLD9 at the prompt and click Next.
    The Extraction Wizard begins unzipping files.
  5. Click Finish to complete the file extraction.
  6. Remove the USB pole display cable from the USB port.
  7. Right-click any unknown items, and then click to select Remove. (Figure 2)
    NOTE: If there are any references to Line Display LD9900, right-click the listing, and then click Uninstall.
  8. Repeat step 2 until there are no unknown devices in Device Manager.
  9. Right-click any unknown items, and then click to select Remove.
  10. Repeat this step until there are no unknown devices left.
  11. Reconnect the USB pole display cable to the USB port.
    The operating system detects the device and the Found New Hardware wizard appears.
  12. Choose Specific Location and click Next.
  13. Under the Include this location in the search field section, click Browse and click to select C:LCLD9.
  14. Select driver LCLD9.inf, click Next,and then click Finish.
  15. Right-click My Computer andclick Properties.
    The System Properties window appears.
  16. Select the Hardware tab and click Device Manager.
    The Device Manager window appears.
  17. Complete the installation by verifying the driver is now appearing in Device Manager correctly. (Figure 1)

Install the pole display USB drivers (Virtual COM Port).

Floppy Disk Install

To install the pole display USB virtual COM port drivers from the floppy diskette, perform the following steps:

  1. Connect the USB pole display cable to the USB port.
    The operating system detects the device and the Found New Hardware wizard appears.
  2. Click to select Specific Location and click Next.
  3. Insert the LD9900 USB Driver diskette into the floppy disk drive.
  4. Under the Include this location in the search field section, click Browse and click to select A:Win2000.
  5. Click to select driver LD9COM.inf, click Next,and thenclick Finish.
  6. Remove the LD9900 USB Driver diskette.
  7. Right-click My Computer andclick Properties.
    The System Properties window appears.
  8. Select the Hardware tab and click Device Manager.
    The Device Manager window appears.
  9. Complete the installation by verifying the driver is now appearing correctly in device manager under Ports (COM & LPT), and note the port number.

Floppy Disk Reinstall

To reinstall the pole display USB virtual COM port drivers from the floppy diskette, perform the following steps:

  1. Remove the USB pole display cable from the USB port.
  2. Right-click any unknown items, and then click to select Remove. (Figure 2)
    NOTE: If there are any references to Line Display LD9900, right-click on the listing, and then click Uninstall.
  3. Repeat step 2 until there are no unknown devices in Device Manager.
  4. Reconnect the USB pole display cable to the USB port.
    The operating system detects the device and the Found New Hardware wizard appears.
  5. Click to select Specific Location and click Next.
  6. Insert the LD9900 USB Driver diskette into the floppy disk drive.
  7. Under the Include this location in the search field section, click Browse and click to select A:Win2000.
  8. Click to select driver LD9COM.inf, click Next,and thenclick Finish.
  9. Remove the LD9900 USB Driver diskette.
  10. Right-click My Computer andclick Properties.
    The System Properties window appears.
  11. Select the Hardware tab and click Device Manager.
    The Device Manager window appears.
  12. Complete the installation by verifying the driver is now appearing correctly in device manager under Ports (COM & LPT) and note the port number.

Internet Install

Logiccontrols Port Devices Driver Download Windows 8

To install the pole display USB virtual COM port drivers from the Internet, perform the following steps:

Logiccontrols Port Devices Driver Download Windows 10

  1. Download the driver file at: www.logiccontrols.com/web/utilities/ld9w2kcom.zip.
  2. Choose Open from the File Download prompt.
  3. Click File and click to select Extract All.
    The Extraction Wizard screen loads.
  4. Type C:LCLD9 at the prompt and click Next.
    The Extraction Wizard begins unzipping files.
  5. Click Finish to complete the file extraction.
  6. Connect the USB pole display cable to the USB port.
    The operating system detects the device and the Found New Hardware wizard appears.
  7. Click to select Specific Location and then click Next.
  8. Under the Include this location in the search field section, click Browse and click to select C:LCLD9.
  9. Select driver LCLD9.inf, click Next,and then click Finish.
  10. Right-click My Computer andthenclick Properties.
    The System Properties window appears.
  11. Select the Hardware tab and click Device Manager.
    The Device Manager window appears.
  12. Complete the installation by verifying the driver is now appearing correctly in device manager under Ports (COM & LPT) and note the port number.

Internet Reinstall

To reinstall the pole display USB virtual COM port drivers from the Internet, perform the following steps:

  1. Download the driver file at: www.logiccontrols.com/web/utilities/ld9w2kcom.zip.
  2. Choose Open from the File Download prompt.
  3. Click File, and then click to select Extract All.
    The Extraction Wizard screen loads.
  4. Type C:LCLD9 at the prompt and click Next.
    The Extraction Wizard begins unzipping files.
  5. Click Finish to complete the file extraction.
  6. Remove the USB pole display cable from the USB port.
  7. Right-click any unknown items, and then click to select Remove. (Figure 2)
    NOTE: If there are any references to Line Display LD9900, right-click the listing, and then click Uninstall.
  8. Repeat step 2 until there are no unknown devices in Device Manager.
  9. Right-click any unknown items, and click to select Remove.
  10. Repeat this step until there are no unknown devices left.
  11. Reconnect the USB pole display cable to the USB port.
    The operating system detects the device and the Found New Hardware wizard appears.
  12. Choose Specific Location and click Next.
  13. Under the Include this location in the search field section, click Browse and click to select C:LCLD9.
  14. Select driver LD9COM.inf, click Next, and then click Finish.
  15. Right-click My Computer andthenclick Properties.
    The System Properties screen loads.
  16. Select the Hardware tab and click Device Manager.
    The Device Manager window appears.
  17. Complete the installation by verifying the driver is now appearing correctly in device manager under Ports (COM & LPT), and note the port number.