Kaba Port Devices Driver

 admin
  1. Kaba Port Devices Driver Tp-link
  2. Kaba Port Devices Driver Device
Skip to end of metadataGo to start of metadataKaba port devices driver license test

Our server provides the opportunity to integrate event information from Kaba online door locks. The following figure shows how the integration has to be done.

Jul 05, 2017 If you have to manually install a driver for the device — perhaps the driver is already installed on your system — you can use the Update Driver button in the device’s Properties window. If the device driver is already installed on your system, click the “Browse my computer for driver software” link and choose an installed driver.

  • The package provides the installation files for FTDI USB Serial Port Driver version 2.12.16.0. If the driver is already installed on your system, updating (overwrite-installing) may fix various.
  • See full list on docs.microsoft.com.
  • Run the Hardware and Devices Troubleshooter. Windows 10 has a built-in troubleshooter to check and fix issues with hardware and devices. I would suggest you to run this troubleshooter to check if the issue is with the Bluetooth adapter. Refer these steps: Press Windows key +X, select Control panel.

Kaba door locks are using a wireless communication protocol which is based on ZigBee. In order to retrieve information like door events, ZigBee/IP hubs are required. These hubs are provided by Kaba and have the aim to translate ZigBee packets into IP packets for the local area network (LAN). Depending on the project multiple ZigBee hubs are needed.

Kaba door locks are using a wireless communication protocol which is based on ZigBee. In order to retrieve information like door events, ZigBee/IP hubs are required. These hubs are provided by Kaba and have the aim to translate ZigBee packets into IP packets for the local area network (LAN). Depending on the project multiple ZigBee hubs are needed.

The events are centrally collected by the Kaba server software. This software package provides an interface called Messenger LENS web service interface. This interface provides the opportunity to send events via push notifications to third-party software. In detail, the Kaba software acts as a web service client that sends web service requests to our server which in turn acts as web service server. The communication protocol itself is based on SOAP web services.

driver is implement as a plugin for the NETx BMS Core Server. Therefore, it has to be installed via the Extension Manager. To do so, stop the NETx Server, Extension Manager in 'Extensions' tab. Select the 'Kaba' interface and press install as shown in the following screenshot:

After having installed the interface, restart the server.

First, the Messenger LENS web service interface has to be configured. Open a web browser and open the login screen of the Messenger LENS web interface. Within the http URL, use the IP address of the PC where the Kaba software is running.

Afterwards, select the 'Configuration' tab, select 'Group Permissions' and add a new group permission. Within the wizard, go through step 1 - 3 and select the events and locks that you want to receive within the NETx Server. Within step 4, select 'Allow User's Web Service' and enter the following URL (replace <IP NETx Server> with the IP address of the PC where the NETx Server is running and choose a free port (e.g. 6005):

The following screenshot shows an example.

Finish the configuration by going through the remaining steps 5 - 7.

Afterwards, change to the tab 'Operations', select 'Subscription' and add a new subscription. Select the events, the user and the locks. Within the last step (step 4) of the wizard, 'Notify me on my Web server' should be selected and the web service URL should be shown.

As next, open the studio. First, configure the communication port that you have enter within the web service URL. This can be done by selecting 'Driver Configuration' within the menu 'Modules' -> 'Kaba'.

Then, the used devices have to be created. This is done within the 'Device definitions' within the menu 'Modules' -> 'Kaba'. Each definition line corresponds to one device. The first column defines the device name. The device name must be unique and is shown within the item tree the NETx Server. The next column 'Device ID' is optional. 'Device Name' and 'Device ID' are used to assign a web service notification to the corresponding item within the item tree. This means that either 'Device Name' or 'Device ID' must be the same as the Kaba software uses within the web service request. The 3rd column 'Path' is used to define an optional structure within the item tree. 'Description' is used to provide additional information which is stored within the item property 'Description'. The remaining field 'Persistent', 'Historical' (NETx BMS Server 2.0 only) and 'Synchronize' have the same functionality as for all other interfaces within the NETx Server.

FiledDescription
Device NameMust be the same as the Kaba software uses within the web service request
Device IDMust be the same as the Kaba software uses within the web service request
PathDefine an optional structure within the item tree
DescriptionProvide additional information which is stored within the item property

The following figure shows an example where 1 door lock is defined. In addition, the ZigBee/IP called 'Hub Floor1' is also defined in order to receive events dedicated to the ZigBee/IP hub.

After having defined all devices, the server has to be restarted. Afterwards, the configured devices are shown within the item tree under the sub tree 'NETxXIOKaba'.

The retrieved information from Kaba is stored as Server Items. Each retrieved field from the web service request is stored as one server item. Regardless which fields are selected within the Messenger LENS interface, all fields are always shown within the server. However, only 5 Server Items are counted to the license for each defined device. All other items are not counted to the license and are thus for free.

The most important information is the 'Event ID' and 'Event Name' which indicate the event type. This information can be linked to an XLogic command or LUA task in order to trigger some actions like changing a data point (e.g. trigger a lighting scene). The following table gives an overview of all events:

Event ID

Event Name

Event ID

Event Name


Date time Error

Date time OK
42Deadbolt reset (retracted)
26Deadbolt / Privacy
4

Door ajar clear or Door Secure


Door ajar Generic
41Door Ajar Guest Long

Door Ajar Guest Short

Door Ajar Staff Long


Door Ajar Staff Short

Door Latched

Door Unlatched
17Generic Egress

Guest Key Used
8195Hub status OFFLINE
8194Hub status ONLINE

Key Error - Canceled Key Used
66Key error - Expired

Key Error - Other

Key error - Wrong Room
55Lock status OFFLINE
54Lock status ONLINE

Low battery

Low Battery Clear or Battery Normal

Mechanical Key Override

New Guest Key Used

Paging Keys

Staff Key Used

Standing Intruder

Transaction Failed

Wandering Intruder

Article applies to the following products:

  • NETx BMS Platform
  • NETx Multi Protocol Server
  • NETx BMS Server 2.0
--- Software Downloads ---

Note:

1. Please temporarily disable Antivirus Real Time Protection or open a window for downloading to prevent from Over-Protection, causing

'Incomplete Download'. Please check downloaded file size to see if it has the same size as original on the web site.

Otherwise you may fail to Unzip and install the driver due to 'Incomplete Download'.

2. For files with rar extension, download 'RAR' Decompress SW from http://www.win-rar.com/download.html ;
For files with zip extension, download Unzip SW from http://www.winzip.com/win/en/downwz.htm ;

For files with PDF extension, download pdf reader from http://www.adobe.com/downloads/

3.Please provide basic data when inquiring support: (1) dongle serial number with the prefix, (2) year/ date purchased , (3) from where you bought, (4) Your other IR device (type/brand/model) you want to link to? (see Tech Support Form)

ACT-IRx24UN series (incl. IR224UN/424UN, IRx24UN-Li, IRx24UN-LN, IRx24UN-L+; IRx24UN-Lx-LE series)

Drivers for Mac OS, Windows (32 & 64 bit); WinCE; & Linux (Note: Shares the same driver for ACT-IR100UD family & ACT1-201)
For Windows 7/8/10 OS, Dvr installer v1.5.0 and Install Guide for ACT-IRx24UN-Lx and IRx24UN-Lx-LE (Compatible Driver & TSPack for those IR adapters which their SN# prefix starts with 'UN' or 'LI').

Please contact [email protected] for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number that is not 'UN' or 'LI'. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 above for providing your basic data)

For Windows 7/8/10 OS, Dvr installer v1.12.0 and Install Guide for ACT-IRx24UN-Lx and IRx24UN-Lx-LE
(Compatible Driver & TSPack for those IR adapters which their SN# prefix starts with 'TA').

Please contact [email protected] for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 above for providing your basic data)

IRx24UN-Lx_Lx-LE-Manual-v1.3.4-140324.pdf General Manual - ACT-IRx24UN-Li/IRx24UN-L+/ IRx24UN-LN and ACT-IRx24UN-Lx-LE
Advanced-Uninstaller-121127.zip_File Size=18279KBThis is a Driver Remover for those users who could not uninstall the old driver from PC successfully. After running this software and complete un-installation is done, please reboot your PC. Then install the new driver. ( Source: Advance Uninstaller PRO by Innovative Solutions.)
  • For Mac OS X 10.11 El Capitan (64-bit)
  • For Mac OS X 10.10 Yosemite (64-bit)
  • For Mac OS X 10.9 Mavericks (64-bit)
  • For PL2303 H/HX/HXD/EA/RA/SA/TA/TB chip versions
  • For Prolific USB VID_067B&PID_2303 Only
  • Includes Driver Installation Manual

Please contact [email protected] for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 above for providing your basic data)

md_IRx24UN_H_HX_X_dmg_v1.2.1r2.zipACT-IR224UN/424UN Mac OS X Universal Binary Driver (DMG file format)
For MacOS 10.1 and above for PowerPC based Mac
For MacOS 10.4 and above for PowerPC and Intel based Mac
Supports Mac OS X 10.5 and above for PowerPC and Intel based Mac
md_IRx24UN_Mac8_9_v136b1.zipACT-IR224UN/424UN Mac OS 8 & 9 driver v1.3.6 build 1
ACT-IR224UN-Li-4Mac-Manual-v1.3.4-140324.pdfManual - for Mac Users of ACT-IR224UN-Li
Generic_IRx24UN_WinCE50_ARM_v1009.CABACT-IR224UN/424UN WinCE 5.0 Driver for ARM Standard SDK
Also for Windows Mobile 6, Windows Mobile 5, PocketPC 2003.
NOTE: Check HKEY_LOCAL_MACHINEDriversActiveUSBSER folder in registry for the COM port number.
Generic_IRx24UN_WinCE50_x86_v1009.CABACT-IR224UN/424UN WinCE 5.0 Driver for x86 Standard SDK
Also for Windows Mobile 6, Windows Mobile 5, PocketPC 2003.
NOTE: Check HKEY_LOCAL_MACHINEDriversActiveUSBSER folder in registry for the COM port number.
ld_IRx24UN_Linux_v0728.rarACT-IR224UN/424UN Linux driver for RedHat 7.3/8.0/9.0 Only.
NOTE: No need to install drivers for following:
Linux Kernel 2.4.10 and above already includes built-in drivers for PL-2303H.
Linux Kernel 2.4.31 and above already includes built-in drivers for PL-2303H, PL-2303XA/HXA and PL-2303HXD
ACT-IR224UN/IR424UN Configuration utility

Please contact [email protected] for it (Please See NOTE3for providing your basic data)

ACT1-201 ; ACT1-211
ACT1-201 Driver
Driver InstallerPlease just download from IR224UN.Actually they share the same driver.
ACT1-211 GPS Driver
ACT1-211_1414_20110314_GPS.zipGPS Driver to block Windows Mouse problem occur at 2400 bps (supports Win7 32 and 64 bit)
ACT-IR100UD-MDT
ACT-IR100UD-MDT-CD-v1.1.0-130208.zipCD for IR100UD-MDT which includes Windows driver. Please download other drivers from above IRx24UNjust in case needed. They actually share the same.
ACT-IR2000UL/IR4000US
User's Manual for Windows XP/Vista/Win7/8/10

Please contact [email protected] (Please See NOTE3 above for providing your basic data)

Driver for Windows 98/Me/2000/XP/vista/Win7/8/10 (32 & 64 bit)
Please contact [email protected] for the driver (for some old IR adapters the IC used inside is EOL, with no driver support.
This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside).
(Please See NOTE3 above for providing your basic data)
ACT-IR2002UL/IR4002US
IR2002UL/IR4002US Manual

Please contact [email protected] (Please See NOTE3 above for providing your basic data)

IR2002UL /IR4002US Drivers
Please contact [email protected] for the driver (for some old IR adapters the IC used inside is EOL, with no driver support.
This can be identified by your IR adapter serial number. In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside).
(Please See NOTE3 abovefor providing your basic data)
Note:If you useIrDA-OBEX, these USB-IrDA adapters support Win7/8/10-32 and 64 bit.
But, if you use IrDA-IrComm,you'll need IrComm2K ( free software from 3rd party) for all Windows O.S., including Win7-32 bit.
However,IrComm2K does Not support 64bit. then please use ACT-IR100UD/ACT-IR100UD-v2/IR100UD-v3, the Intelligent USB-IrDA adapter which is our once-for-all solution.
ACT-IR100UD/ IR120UD/ IR100UD-v2/ IR100UD-v3
ACT-IR100UD/ IR120UD/ IR100UD-v2/ IR100UD-v3 Drivers & Manuals
Please contact [email protected] for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number.
In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 abovefor providing your basic data)
CD for IR100UD-LPT

Please contact [email protected] (Please See NOTE3 abovefor providing your basic data)

ACT-IR100M/ IR100MP/IR100MU
ACT-IR100Mx Series (100M/100MP/100MU) User Manual
ACT-IR100MxManual -v3.2.2.1-080324.pdf

Manual for ACT-IR100M/IR100MP

ACT-IR100MU-Manual-v1.2-100108.pdfManual for ACT-IR100MU
IR82x0D/IR8250P/IR826xD

Spec for ACT-IR82x0D

Technical Spec for ACT-IR82x0D

Spec of ACT-IR8250P

Technical Spec for ACT-IR8250P

ACT-IR826xD-Technical-v1.0.0.1-120220.pdf Technical Spec for ACT-IR826xD
ACT-IR3200M
ACT-IR3200M User Guide
Please contact [email protected](Please See NOTE3 above for providing your basic data)
ACT-IR200L/IR220L/IR220L+
Windows 7/8/10 Driver
Please contact [email protected] for the driver (for some old IR adapters the IC used inside is EOL, with no driver support. This can be identified by your IR adapter serial number.
In such a case there will be no Windows 10 driver, may need to buy new IR adapter with new IC inside). (Please See NOTE3 above for providing your basic data) It is for Windows 7/8/10 IrDA driver.
Windows User Manual - for IrDA use
IR200L-IR220L&IR220L+ Manual.pdfDriver install/uninstall procedure for Windows 98/2000/XP/Vista/Win7/8/10 (32 & 64 bit)
ACTiLinkACPI_011L.zip
  1. NOTE: a. You Need Not install ACTiLinkACPI for your PC UNLESS it is really needed under some Notebook PC for IR220L+ due to below reasons.
    NOTE: b. The file we provide here is ONLY a 30-day TRIAL Version. Please BUY the Standard Version i
    f you feel it DOES Help, after the trial period expired.

  2. [What is ACPI]: In Win98SE and later Windows O.S., ACPI manager is used to save power for notebook PC. e.g., if no software using floating calculation, ACPI manager may turn off CPU. It then saves power.

  3. [What it helps]: ACPI manager also disables COM port. ACT-IR220L+ uses no external power, which gets from RS232 COM port RTS/DTR signal lines. This is to Deactivate this function, so that IR220L+ can get power and function well.

  4. Windows OS relevance : ACTiLinkACPI will not work on all OLD Windows O.S., e.g. Windows 95.

ACT-IR200L
ACT-IR200L-UsefulLink-v1.0.0-101013.pdfUseful Third Party Driver/Software Developer URL Link for ACT-IR200L
Windows 3.11 Driver
Irwin311.zip Irwin311.exe - Windows 3.11 Driver for IR200L/220L/220L+ Only
Windows 95 Driver
Irda20.zip Irda20.zip - Windows 95 Driver for IR200L/220L/220L+ Only
IrCOMM
IrComm for Windows 2000/XP/Vista/Win 7
IrComm2K.zipIrComm - to Create Virtual Port
Manual-VirtualCOMport-IrCOMM2Kdriver.pdfMicrosoft Windows 2K/XP/Vista/Win7 IrDA stack does not include IrCOMM. So, if your opposite IrDA device supports IrCOMM as a upper IrDA application protocol and wish your device exchange data using IrCOMM protocol then you can download this Third party driver and install it. Please, refer Manual for installation
ACT-IR204UN
CD Pack for ACT-IR204UN
ACT-IR204UN installation CD [Note]: Only supports up to Windows XP.
(for Windows Vista/7/8/10 and up, IR224UN is its replacement.(2nd generation)

Please contact [email protected] (Please See NOTE3 above for providing your basic data)

BLUETOOTH Dongles:
ACT-BT5100US-Air
BT5100US-Air.zip Driver Installation CD: IVT BlueSoleil (TM) 1.6.1.1 & user manual
ACT-BT5701S v2
ACT-BT5701Sv2-Manual-v2.1.1-101223.zipUser's manual
ACT-BT5711U
ACT-BT5711U-Manual-v1.0.3.1-140529.zipUser's manual
ACT-BT5800UB & BT5900US
Note-Printer_PortSetting.pdfA common Note on Printer Port Setup
OTHER OLD Dongles Solutions:
PleaseGoto DownLoads OOther old dongles solutions

Kaba Port Devices Driver Device


[ Home Page About ACTiSYS Contact us IrDA Products Tutorials IrDA Test Center Compatibility

[ Order Price Quote Technical Support Downloads Track a Package Jobs Feedback Privacy Terms ]

ACTiSYS CORP. 921 Corporate WayFremont, CA 94539 Tel: +1-510-490-8024 Fax: +1-510-623-7268 [email protected]

©1996-2015 ACTiSYS Corporation, All Rights Reserved
--------------------------------------------------------------------------------------------------
Member of Infrared Data Association (IrDA
®) Since Its Founding Day!